In order to be a photographer, you must be able to make decisions, not simply point a camera and press a button. Photography can be an important activity as it can help people, adults and children, understand what the media projects every day. Besides that, it is a good hobby, and photography can help people understand the world around them, especially through someone else’s eyes. It is a great way to bring together a community project as well.

It is quite easy to touch the optics of a camera and leave fingerprints. The result is that your pictures do not turn out clear in certain areas. Or, the autofocus sensors (if your camera has them) can be fooled by the smudge you leave on them, and deliver blurred pictures. Regularly clean your optics with an appropriate cloth and solution (both obtained at any respectable camera store). Do not use tissue paper, your finger, spit or household cleaning solutions.

The autofocus of most cameras has a two-step shutter release. Pressing the button down half-way locks the focus of the picture, and pressing it down all the way takes the picture. Depressing the shutter only half-way allows you to select what part of the picture you would like to be clearly focused; after holding the button halfway down, you can move the picture so that the subject is where you want it to be and yet is still focused. Always press the button gently, not jerkingly, so as not to move the camera too much from the frame and composition.

Depth of field is all the objects in the foreground and the background around the subject of your photo, and they will be in focus as well as your subject. The focusing distance and the size of the image, as well as the aperture you’re using, can change the way depth of field is perceived. The larger the aperture, the smaller the depth of field. For example, if you move closer to your subject, the depth of field would decrease. If you move farther away, or use a smaller aperture, the depth of field would decrease.

One aspect of taking a pleasing photograph is depth of field. When you look at a picture, you will notice that all the area surrounding the focused subject is also focused. This area is called depth of field. In order to change the way the depth of field in a picture is seen, focused, and lit, you must change the width of your lens. The wider the lens is, the smaller the depth of field will be. To decrease the depth of field you can also move closer to your subject. To increase it, you can use a smaller lens or move further away from your subject.

Landscapes are the opposite end of portraits in the sense that you mostly want all the picture to be in focus. To achieve this effect, use as small a f/stop as your camera allows, say f/16. The smaller the f/stop, the greater the depth of field achieved, and objects near and far will be in focus (again, with consumer digital cameras and the short focal lengths of their lenses, good depth of field is achieved even with ‘large’ f/stop). You could use the Law of Thirds to capture 1/3 land and 2/3 sky, or the other way round, 2/3 land and 1/3 sky. You would surely want to use a wide-angle lens setting. Adding a foreground object might help achieve a sense of three dimensionality. If water is involved, a slow shutter speed will give the impression of flowing water. If the sea is involved, a polarizing filter will cut glare and give the ‘transparent’ water effect.

A tripod is a good investment in photography, especially if you want to take panoramic pictures. You’ll have to set your tripod in a place where you can swivel the camera smoothly from left to right, and not up and down. You will have to figure out where you want your pictures to overlap, so that you don’t have huge gaps in your resulting picture. Once you figure that out, you can swivel your camera in one direction, clockwise or counterclockwise, to take the pictures you want. Once you’re done, all you have to do is put them together with a simple graphics program or photo-editing software.