Product barcodes are read by barcode scanners in more everyday situations than most of us realize. One of the most familiar uses of this technology is with barcodes on product packages at grocery stores. When we buy something a bar code scanner scans and reads the barcodes on each package. Product information such as product name and unit cost is automatically read and processed by the stock control system. A short description and the amount of each item is automatically added to your bill as each new item is scanned.

When you buy a product such as a can of soup or a box of cereal, it alerts the stock control system to the fact that the item was purchased. This allows the control system to maintain a current record of how many of each item is still available for purchase. As long as the entire inventory was entered correctly in the first place, this allows your inventory control to be automatic and constantly up to date.

In a small business setting implementing such a system starts with stock control software where information about inventory items is stored. Bar code scanners are used to input data into the stock control system. Each time an item passes in or out of inventory it is scanned and the appropriate change of status is recorded in the inventory database.

Such a system can even create unique bar codes for items that do not already have them. For new items a unique bar code is generated by the software, and then a bar code printer is used to print a bar code label that is then affixed to the item.

The three most prevalent kinds of bar code scanners available now are:

1. The Wand Scanner - The most basic type of bar code scanner is the “wand”. This is a pen-type scanner that needs to be kept in contact with the bar code when scanning it. The wand emits a light which is reflected off the bar code and then decoded by the system to identify the item.

It is necessary to keep a wand scanner in touch with the UPC code while scanning it. The wand scanner, which is a pen-like scanner, is the simplest type of UPC scanner. It gives off a light that reflects off the UPC code, which in turn is decoded by the POS system to recognize the product.

However, wand scanners are limited in their operation. To succeed in obtaining a proper reading, the wand has to be positioned correctly with respect to the bar coding label. It is necessary as well to slide the wand along the label neither overly rapidly nor overly slowly. Wand scanners are limited by their resolution requirements too. If a bar code’s resolution is too fine, then the wand won’t be successful in scanning it properly. For instance, a 5 mil bar code cannot be read by a 10 mil device. You must remember that when you go out to buy a wand scanner.

2. The CCD Scanner - CCD (charged coupled device) technology is the next least expensive bar code scanning system. Like the wand scanner, CCD readers must be in direct contact with the bar code label in order to read it. But unlike the wand, there is no need to move the device across the label. The operator simply presses the reader against the label and pulls the trigger. The bar code is then photographed, digitized and decoded by the system.

Of all the different types of bar code scanners, CCD readers are considered the most straight-forward to use. They are manufactured in widths that start at about 2 and go up to 4 inches. A CCD reader is expensive compared to a wand (about four times the cost), but is a bargain compared to the laser scanner (about one third the cost).

A promising new technology similar to CCD is called FFO (Fixed Focus Optics). These scanners are non-contact readers, which means they can read bar codes from as much as 20″ away. They will also be able to read two-dimensional bar codes as they become more popular.

3. Laser Scanners - A beam of light is used by a laser scanner in order to scan the bar code label. Instead of moving the scanner you move the bar code across the scanner. The scanner does not have to actually touch the bar code label in order to read it. The scanner will automatically read the scan whenever a bar code is held in front of it.

This system is widely used in many different types of installations. Scanning is such a quick process that it ss even possible to insert laser scanners directly into conveyor systems. As objects move along the conveyor, they are automatically scanned and recorded. You see this in grocery stores, where the cashier simply moves the items over the scanner to scan them. This type of system is quick enough to keep up with even the fastest motion of a cashier, and it is quicker and far more accurate than any other alternative system that could be used.

Regardless of which scanning system is best for your business right now, be sure to purchase stock control software that lets you implement other scanning technologies as the need arises.